Valley Ridge

Austel Brown II Porcelain Tile

Wichita’s everyday low price!
$2.99 / sqft Size: 8 x 48 Color: Brown $37.95 / box
Calculate my square footage
Number of boxes
Quantity of boxes
$37.95 / box 1 box = 12.70 sqft | 5 pieces | $37.95
Limit of 9,999
We have adjusted the number of products entered as the maximum quantity threshold is 9,999. If you need to purchase a higher quantity, please contact Customer Care at 877-675-0002
subtotal
Item will be shipped and should arrive in 7-14 days.
You will be notified by email when the item arrives.
Shipping charges may apply.

Wichita - 0 boxes

Check Other Stores

This item can be picked up TOMORROW for FREE

Item will be shipped and should arrive in 7-14 days.

Shipping charges may apply. Items may arrive in multiple shipments.

Delivery details

Calculate Estimated Shipping + Handling Cost
Consider in-store pickup or contact Customer Care at 404-720-9120 for home delivery pricing.
Estimated Shipping + Handling Cost $16.23

Materials You Need from Start to Finish

Specifications

Dimensions
Size 8 x 48
Product Length (inches) 47.13
Product Width (inches) 7.76
Product Thickness 10mm
Box Length 47.37
Box Width 8
Box Weight 62.85 lbs
Box Quantity 5
Coverage (sqft/pc) 2.54
PEI Rating

P.E.I. rating measures Tile design durability from 1-5:

  • P.E.I. of 3 & above is suitable for home use
  • P.E.I. of 5 is suitable for commercial & high traffic areas

 3
DCOF Value

The Dynamic Coefficient of Friction is a rating of the slip resistance of a floor. It is a measurement of how much friction there is on a floor when walked upon. The higher the number, the more slip resistant.

 >=.42
Water Absorption

Though absorption rate may vary, product rated greater than 0.5% is not recommended for outdoor installation, but can be used indoors. All tile is recommended for interior use.

 Less than 0.50 percent
MOHS - Scratch Resistant Test

Most manufacturers use the MOHS scale to test the scratch and abrasion resistance of the glaze applied to tile. The MOHS scale is based on a relative value of 1-10; with 1 being the softest and 10 being the hardest. The following are the ten standard minerals used in the scale. 1. Talc, 2. Gypsum, 3. Calcite, 4. Fluorite, 5. Apatite, 6. Orthoclase, 7. Quartz, 8. Topaz, 9. Corundum, 10. Diamond.

 4
Details
Material Porcelain
Color Brown
Edge

Edge-style affects both appearance & ease of installation like:

  • Pressed (rounded edge)
  • Chiseled (rustic look)
  • Rectified (straight edge/smallest grout line)

 Straight or Rectified
Finish Matte
Look

We have options of Tile to match your style. Choose from: Linen, Contemporary, Rectangular, Polished, Slate, Pattern, Stone Look & Wood Look.

 Wood Look
Body Color
  • Through-body: The pattern or color is permeated throughout the entire body of the tile, thus reducing the visibility of dents and chips.
  • Color-body: The body features the most predominate color found in the tile, and the surface showcases the pattern and color.
  • Double-loaded: Porcelain tile that is produced with two layers of porcelain pressed together before it’s fired in the kiln.
  • Standard Body: The raw material used to create this tile is not colored to match the graphics on the surface of the Tile. The body color of the material is indicative of the country of origin’s raw materials.
 Standard Body
Water Resistance

Waterproof and water-resistant designations refer to the product’s ability to withstand moisture and spills. Waterproof or water-resistant tile is suitable for all rooms in the house including kitchens, basements, and bathrooms. Some tile requires sealing during the installation process in order to withstand exposure to water. All tile must be installed properly for these conditions to be met.

 Waterproof
Frost Resistance

Tile's ability to withstand freeze-thaw cycles when directly exposed to the elements.

 Frost Resistant
Print Quality

Print quality on Tile varies from:

  • Ink Jet (highest definition/most realistic)
  • Roto Color (better quality/realistic)
  • Screen Printing (good quality/each tile is identical with no variation)

 Inkjet
Country of Origin

Direct from the four corners of the globe to bring better products & prices to you.

 USA
Installation & Warranty
Suggested Grout Line Size

The recommended grout line thickness for best results in a tile installation.

 1/8, 3/16, 3/8, or 1/4
Sealant

Ceramic and Porcelain tiles do not require sealing prior to installation. Sealers can provide an enhanced look to your project, if desired. A sealer may be required for the grout, depending on the type of grout selected and installation application.

 Recommended
Installation Type Grout & Mortar
Placement Location Indoor
Installation Options

The surface for which the product can be installed upon. The surface should be clean, stable, and meet installation and warranty guidelines prior to installation.

 Floor/Wall
Shower Surface Suitable for Shower Floors
Shower Surface Suitable for Shower Walls
Pool Surface

Able to be submersed in water and suitable for both saltwater and chlorine pools

 Pool Interiors
Radiant Heat Compatible

This states whether a product is compatible for use with radiant heat kits. See installation instructions and warranty for more details.

 Yes
Floor Suitability Rating

Light Residential: Suitable for wall applications or areas with light foot traffic such as powder rooms or guest rooms. 

•    Comparable to PEI 1 & 2

All Residential / Light Commercial: Suitable for use in regularly trafficked residential areas such as kitchens, hallways, bedrooms, and laundry rooms. Light commercial areas with limited traffic, such as offices and retail shops, are acceptable.

•    Comparable to PEI 3

All Residential / All Commercial: Suitable for use in heavily trafficked residential and commercial areas, such as foyers, living rooms, lobbies, hospitals, and airports. 

•    Comparable to PEI 4 & 5

 All Residential/ Light Commercial
Bathroom Floor Use Suitable for Bathroom Floor
Fireplace Surround Use Yes
Show More

Product Details

This brown matte Austel Brown II Porcelain Tile is 8 x 48.

Inkjet technology offers a wider range of color, finer details, and more variation in the design for a wood-look that has more character and authenticity on the tile itself.

This tile is made in the USA, where high-quality design meets efficient production.

The look of wood with the worry-free nature of tile is sure to be the perfect touch for your home. The Austel Brown II Porcelain Tile will add a unique touch to any room or project. Everything from the edges to the printed design of the tile can complete the look of your room, and you get can get the added benefit of durability, too.

The P.E.I. scale measures a tile s ability to withstand foot traffic on a scale of 1-5. This tile has a P.E.I. rating of 3, so it can be used for all interior countertop applications, indoor walls, and all residential interior floors.

Customer Projects

REAL PEOPLE, REAL PROJECTS ®

Looking for inspiration? Check out these real customer projects.
REAL PEOPLE, REAL PROJECTS

Customer Questions & Answers